United States, National Bureau of Standards
Label
United States, National Bureau of Standards
Name
United States
Subordinate unit
National Bureau of Standards
Actions
Incoming Resources
- Color characteristics of a green plastic developed by the Rohm and Haas Company for beacon covers, F.C. Breckenridge
- Photometric tests of an AVQ-2A aircraft searchlight equipped with a precision-grade, parabolic "non-roll-off" edge, back-silvered glass reflector, W.F. Mullis, T.H. Projector
- Development of methods of test for quality control of porcelain enamels, progress report April 1 through June 30, 1964, Winthrop C. Wolfe
- Energy budget procedures and performance criteria for energy conserving building illumination systems, A.T. Hattenburg ... et al., Center for Building Technology, National Engineering Laboratory, National Bureau of Standards, U.S. Department of Commerce
- Electronic bulletin boards, Ted Landberg
- Sound insulation of wall, floor, and door constructions, Richard V. Waterhouse, Raymond D. Berendt, and Richard K. Cook
- Simulated field tests of Durant insulated pipe, Selden D. Cole, P.R. Achenbach
- A test of lens resolution for the photographer, by Irvine C. Gardner
- Performance test of a "Conomatic" air filter model 3-C90, with automatic renewable media B-1-A, manufactured by Continental Air Filters, Inc. Louisville, Kentucky, Carl W. Coblentz, Paul R. Achenbach
- Snowmelting systems for hangar doors, final report, J.C. Davis, Paul R. Achenbach
- Report of examination of perlite-gypsum concrete roof deck, Gentile Air Force Base, Dayton, Ohio, Nolan D. Mitchell
- American standard building code requirements for masonry, by Sectional Committee on Building Code Requirements and Good Practice Recommendations for Masonry-A41, under the sponsorship of the National Bureau of Standards
- Investigations of air-to-air heat pumps for military housing, presented at the Annual Meeting of the Society of American Military Engineers, Paul R. Achenbach
- Thermal conductivity of semiconductive solids, D.R. Flynn
- Thermal conductivity, proceedings of the seventh conference held at the National Bureau of Standards, Gaithersburg, Maryland, November 13-16, 1967, edited by Daniel R. Flynn and Bradley A. Peavy, Jr
- Brooks Bill issue study of the National Bureau of Standards, Center for Computer Sciences and Technology
- Design and performance of remote thermoshield, NAX-2-51, Richard N. Jansson, Oliver N. McDorman
- High-temperature thermodynamics, technical report II, A.M. Bass
- Report on dental research at the National Bureau of Standards, progress report January 1 to June 30, 1969, National Bureau of Standards
- Report of fire test of cellular steel deck and beam, J.V. Ryan
- Electrocatalysis on non-metallic surfaces, proceedings of a workshop held at the National Bureau of Standards, Gaithersburg, Maryland, December 9-12, 1975, edited by Alan D. Franklin ; sponsored by National Bureau of Standards, National Science Foundation, Energy Research and Development Administration
- Methods and procedures used at the National Bureau of Standards to certify sulfur in coal SRM's for sulfur content, calorific value, ash content, Thomas E. Gills, editor
- Biomaterials, proceedings of a symposium held in conjunction with the ninth annual meeting of the Association for the Advancement of Medical Instrumentation, New Orleans, April 19-20, 1974, edited by Emanuel Horowitz and John L. Torgesen
- Drift mobilities and conduction band energies of excess electrons in dielectric liquids, A. O. Allen
- Fire safety for high-rise buildings, the role of communications, Robert A. Glass, Arthur I. Rubin ; prepared for the Center for Fire Research in support of HEW-NBS Fire/Life Safety Program ; sponsored by U.S. Public Health Service, Department of Health, Education, and Welfare
- NBS FIPS Software Documentation, proceedings of a workshop held March 3, 1982 at NBS, Gaithersburg, Md., A.J. Neumann, editor
- Integrated software for microcomputer systems, Lynne S. Rosenthal
- Building Code requirements for new dwelling construction, recommended by the National Housing Agency and prepared in consultation with the National Bureau of Standards, United States Dept. of Commerce, National Bureau of Standards
- Field investigation of the performance of residential retrofit insulation, John L. Weidt, Robert J. Saxler, Walter J. Rossiter, Jr. ; sponsored by Office of Weatherization Assistance, U.S. Department of Energy
- Testing and certification for export products in industrializing countries, proceedings of a regional seminar held at the Regional English Language Centre and International House, Singapore, May 19-20, 1975, edited by H. Steffen Peiser and Robert S. Marvin ; sponsored by the Singapore Institute of Standards and Industrial Research (SISIR), the National Bureau of Standards, and the Agency for International Development ; seminar president, Lee Kum Tatt
- Sound insulation of wall and floor constructions, by V.L. Chrisler
- Abstracted reports and articles of the HUD Modular Integrated Utility Systems (MIUS) Program, M.H. Nimmo and B. Reznek, editors ; prepared for Building Technology Division, Office of Policy Development and Research, Department of Housing and Urban Development, Supplement 1
- Thermal conductivity of austenitic stainless steel, SRM 735, from 5 to 280 K, [by] J.G. Hust and L.L. Sparks, Institute for Basic Standards, National Bureau of Standards
- Survey of building code provisions for historic structures, Melvyn Green and Patrick W. Cooke
- Weather resistance of porcelain enamels, effect of exposure site and other variables after seven years, Margaret A. Rushmer and Milton D. Burdick
- The National Bureau of Standards' linear and quadratic programming subroutines, W.G. Hall, R.H.F. Jackson, P.B. Saunders
- Operating characteristics of a prototype multi-layer cloth air filter for Army aircraft, C.W. Coblentz, P.R. Achenbach
- Capacity tests of five remote air-cooled refrigerant condensers, manufactured by Dunham-Bush, Inc. West Hartford, Connecticut, R.J. Dockery, C.W. Phillips
- Visual Landing Aids Field Service Operation, progress report for the period December 1, 1952 to November 30, 1953, C.A. Douglas, J.W. Simeroth, J.E. Davis
- Evaluation of refractory qualities of concretes for jet aircraft warm-up, power check maintenance aprons, and runways, quarterly report, James V. Ryan, E.C. Tuma, D.K. Ward
- Development, testing, and evaluation of visual landing aids, consolidated progress report for the period January 1 to March 31, 1956, National Bureau of Standards
- Thermal conductivity of a specimen of type 522 alloy, Henry E. Robinson, Frank J. Powell
- Photometric tests of an AVQ-2A aircraft searchlight equipped with each of several reflectors, W.F. Mullis, T.H. Projector
- Tests of precast continuous spliced girders, L.F. Skoda, J.O. Bryson
- Methods of testing thermocouples and thermocouple materials, [by] Wm. F. Roeser and S. T. Lonberger
- Performance test of a folding Aerosolve model 3H-85 air filter, manufactured by Cambridge Filter Corporation Syracuse, New York, Carl W. Coblentz, Paul R. Achenbach
- Development, testing, and evaluation of visual landing aids, consolidated progress report for the period April 1 to June 30, 1954, National Bureau of Standards
- Report on field performance of bituminous protected metals, manufactured by Kramer Trenton Company Trenton, New Jersey, William C. Cullen, P.F. Wendell
- Single-phase transfer of liquefied gases
- Methods of analysis of NBS clay standards, [by] J.I. Shultz [and others
- Safety rules for the installation and maintenance of electrical supply stations, comprising Part I and the grounding rules of the fourth edition, National electrical safety code. February 5. 1926
- American standard specification for dry cells and batteries, Approved January 4, 1937, by the American Standards Association (ASA designation C18 - 1937)
- Report on dental research at the National Bureau of Standards, progress report January 1 to June 30, 1969, National Bureau of Standards
- How to own your home, a handbook for prospective home owners, Prepared by John M. Gries [and] James S. Taylor. Foreword by Herbert Hoover
- NBS staff participation in outside standards activities ... highlights
- A proposed concept for determining the need for air conditioning for buildings based on building thermal response and human comfort, J.E. Hill [and others]
- Development, testing, and evaluation of visual landing aids, consolidated progress report for the period April 1 to June 30, 1954, National Bureau of Standards
- Development, testing, and evaluation of visual landing aids, consolidated progress report for the period January 1 to March 31, 1956, National Bureau of Standards
- Standard test specimens of zinc bronze (Cu88, Sn10, Zn2)--Parts I and II, Part I.--Preparation of specifications, by C.P. Karr, associate physicist. Part II.--Microstructure, by Henry S. Rawdon, assistant physicist, Bureau of standards, Issued March 15, 1916
- Progress report January 8, 1964 through March 31, 1964, National Bureau of Standards
- A search and rescue simulation model for the United States Coast Guard, appendix B - program listings for programmer level documentation, National Bureau of Standards
- Energy transfer in hot gases ;, proceedings of the NBS semicentennial symposium on energy transfer in hot gases held at the NBS on September 17 and 18, 1951
- The economic impact of noise
- Focus of14
- Author of1
- inverse.compiler1
- inverse.issuingbody49
- Publisher of1